Cisco Systems OL-15491-01 Bedienungsanleitung PDF herunterladen (Seite 204)

A-204

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

OL-15491-01

Appendix A CSG2 Command Reference

parse length

To define the maximum number of Layer 7 bytes that the CSG2 is to parse when attempting to assign a

policy, use the parse length command in CSG2 content configuration mode. To restore the default

setting, use the no form of this command.

parse length number

no parse length

Syntax Description

Defaults The CSG2 parses up to 4000 Layer 7 bytes when attempting to assign a policy.

Command Modes CSG2 content configuration

Command History

Usage Guidelines If the parse length is exceeded, the CSG2 blocks or forwards packets on the basis of the block command.

This command is valid only if parse protocol http is also configured.

Examples The following example specifies that the CSG2 is to parse up to 1234 Layer 7 bytes when attempting to

assign a policy:

ip csg content MOVIES

parse protocol http

parse length 1234

Related Commands

number Maximum number of Layer 7 bytes to parse. The range is from 1 to 65535.

The default value is 4000.

Release Modification

12.4(11)MD This command was introduced.

Command Description

block Forces the CSG2 to drop packets that do not match a configured billing

policy.

ip csg content Configures content for CSG2 services, and enters CSG2 content

configuration mode.

parse protocol Defines how the CSG2 is to parse traffic for a content.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 255 256

Keine Kommentare

Cisco Systems OL-15491-01 Bedienungsanleitung Seite 204