Cisco Systems BC-281 Bedienungsanleitung PDF herunterladen (Seite 28)

Configuring Data-Link Switching Plus

DLSw+ Configuration Task List

BC-308

Cisco IOS Bridging and IBM Networking Configuration Guide

78-11737-02

Figure 130 Mapping Traffic Using Port Lists

The definition of a port list is optional. If you want all peers and all interfaces to receive all traffic, you

do not have to define a port list. Simply specify 0 for the list number in the remote peer statement.

To define a port list, use the following command in global configuration mode:

Note Either the ring list or the port list command can be used to associate rings with a given ring list. The

ring list command is easier to type in if you have a large number of rings to define.

DLSw+ Bridge Group List

DLSw+ bridge group lists map traffic on the local Ethernet bridge group interface to remote peers. You

can create a bridge group list and apply the list to remote peer definitions. Traffic received from a remote

peer is only forwarded to the bridge group specified in the bridge group list. Traffic received from a local

interface is only forwarded to peers if the input bridge group number appears in the bridge group list

applied to the remote peer definition. The definition of a bridge group list is optional. Because each

remote peer has a single list number associated with it, if you want traffic to go to a bridge group and to

either a ring list or port list, you should specify the same list number in each definition

To define a bridge-group list, use the following command in global configuration mode:

51860

Token

Ring

Token

Ring

Token

Ring

Token

Ring

Port list 2

Explorer

Port list 1

Peer B: Port list 1

Peer C: Port list 2

Peer B

Peer C

Peer A

Command Purpose

Router(config)# dlsw port-list list-number type

number

Defines a port list.

Command Purpose

Router(config)# dlsw /jointfilesconvert/85086/bgroup-list list-number

/jointfilesconvert/85086/bgroups number

Defines a ring list.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Systems BC-281 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco Systems BC-281