Cisco Systems C819GUK9 Bedienungsanleitung Seite 43
- Seite / 196
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
5-19
Cisco 819 Series Integrated Services Router Software Configuration Guide
OL-23590-02
Chapter 5 Basic Router Configuration
Configuring WAN Interfaces
Step 10
line 3
Example:
Router (config-line)# line 3
Specifies the line configuration mode. It is always 3.
Step 11
script dialer <regexp>
Example:
Router (config-line)# script-dialer gsm
Specifies a default modem chat script.
Step 12
exit
Example:
Router (config-line)# exit
Exits line configuration mode.
Step 13
For GSM:
chat-script <script name> ”” “ATDT*99*<profile
number>#” TIMEOUT <timeout value> CONNECT
For CDMA:
chat-script <script name> "" "ATDT*777*<profile
number>#" TIMEOUT <timeout value> CONNECT
Example:
Router (config)# chat-script gsm "" "ATDT*98*2#"
TIMEOUT 60 "CONNECT“
Configures this line for GSM.
Configures this line for CDMA.
Defines the Attention Dial Tone (ATDT) commands
when the dialer is initiated.
Step 14
interface cellular 0
Example:
Router (config)# interface cellular 0
Specifies the cellular interface.
Step 15
dialer string string
Example:
Router (config)# dialer string gsm
Specifies the dialer script (defined using the chat
script command).
Command or Action Purpose
- September 2, 2013 1
- CONTENTS 3
- B Concepts B-1 8
- C ROM Monitor C-1 9
- Contents 10
- OL-23590-02 10
- Product Overview 11
- General Description 12
- SKU Information 13
- New Features 13
- WLAN Features 14
- 4G LTE Features 14
- Platform Features 14
- Security Features 14
- Wireless Device Overview 15
- Wireless Local Area Network 19
- Images Supported 20
- CleanAir Technology 20
- Dynamic Frequency Selection 20
- WLAN Features 21
- 4G LTE Wireless WAN 23
- Basic Router Configuration 25
- Interface Ports 26
- Default Configuration 26
- Configuring Global Parameters 32
- Configuring WAN Interfaces 33
- Configuring WAN Interfaces 35
- Data Account Provisioning 36
- Manual Activation 38
- Configuring DDR 41
- Configuration for 8705 modem 45
- Step 1 Unplug power 47
- Push Button in WLAN AP 49
- Verifying Configuration 50
- Configuring Static Routes 51
- Configuring Dynamic Routes 52
- Configuring Dynamic Routes 56
- Management 57
- Console Port 64
- Cisco EnergyWise Support 74
- Legacy Protocol Transport 76
- Configuring Serial Interfaces 76
- PPP Encapsulation 77
- Cisco HDLC Encapsulation 77
- Keepalive Timer 78
- Frame Relay Encapsulation 79
- LMI on Frame Relay Interfaces 80
- Configuring PPP 82
- Configuring Bisync 82
- Enabling the Internal Clock 84
- Setting Transmit Delay 85
- Tuning Half-Duplex Timers 92
- Half-Duplex Timers: Example 94
- Configuring Security Features 95
- Configuring AutoSecure 96
- Configuring Access Lists 96
- Access Groups 97
- Configuring Cisco IOS IPS 98
- URL Filtering 98
- Configuring VPN 98
- Remote Access VPN 99
- Site-to-Site VPN 100
- Configuration Examples 101
- DETAILED STEPS 102
- SUMMARY STEPS 103
- Enable Policy Lookup 105
- Where to Go Next 108
- Configuration Example 110
- VLANs and VLAN Trunk Protocol 116
- Layer 2 Ethernet Switching 116
- 802.1x Authentication 116
- Spanning Tree Protocol 116
- Cisco Discovery Protocol 116
- Overview of SNMP MIBs 117
- • Context-based approach 118
- MAC Address Notification 119
- Configuring VLANs 120
- VLANs on the GE Port 121
- Port Security 123
- Configuring IGMP Snooping 124
- Configuring Fallback Bridging 125
- Managing the Switch 126
- Internet 127
- Configuration Tasks 128
- Example: 132
- Verifying Your Configuration 137
- Configuration Example 138
- Configure VLANs 143
- Configuration Tasks 148
- Cisco Easy VPN 150
- APPENDIX 163
- Understanding Command Modes 164
- Getting Help 166
- Using Commands 168
- Saving Configuration Changes 169
- OL-18906-02 170
- Where to Go Next 170
- Concepts 171
- Routing Protocol Options 172
- PPP Authentication Protocols 173
- Ethernet 174
- Dial Backup 175
- Easy IP (Phase 1) 176
- Easy IP (Phase 2) 177
- IP Precedence 178
- Access Lists 179
- Appendix B Concepts 180
- Access Lists 180
- ROM Monitor 181
- ROM Monitor Commands 182
- Command Descriptions 183
- Required Variables 184
- Optional Variables 185
- Examples 186
- Configuration Register 190
- Console Download 192
- Debug Commands 193
- Exiting the ROM Monitor 194
- Common Port Assignments 195
Verwandte Produkte und Handbücher für Vernetzung Cisco Systems C819GUK9
Vernetzung Cisco Systems CCNA 2 Betriebsanweisung
(239 Seiten)
(239 Seiten)
Vernetzung Cisco Systems 901 Bedienungsanleitung
(68 Seiten)
(68 Seiten)
(12 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern