
36
Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0
OL-14942-02
Configuring the NME-NAM-120S For Network Connectivity
Examples
This section provides the following examples:
• Configuring the NME-NAM-120S, page 36
• Checking Network Connectivity with Ping, page 37
• Sample Output for the show ip NAM CLI Command, page 37
Configuring the NME-NAM-120S
In the following example, the external NAM interface is used for management traffic. The HTTP server
and Telnet access are enabled. The resulting NAM CLI prompt is
Enabling HTTP server...
No web users are configured.
Please enter a web administrator user name [admin]:
New password:
Confirm password:
User admin added.
Successfully enabled HTTP server.
Step 7
ip host name
Example:
root@localhost# ip host nam1
(Optional) Sets the NAM system hostname.
Step 8
ip nameserver ip-address
[ip-address][ip-address]
Example:
root@nam1# ip nameserver 209.165.201.1
(Optional) Sets one or more NAM system name servers.
• We recommend that you configure a name server for the
NAM system to resolve Domain Name System (DNS)
requests.
Step 9
ping {host | ip-address}
Example:
root@nam1# ping 10.20.30.40
Checks connectivity to a network device.
• Verify connectivity to the router or another known host.
Step 10
show ip
Example:
root@nam1# show ip
Displays the NAM IP parameters.
• Verify that you properly configured the
NME-NAM-120S.
Command or Action Purpose
Kommentare zu diesen Handbüchern