Cisco Systems XR 12410 Installationshandbuch PDF herunterladen (Seite 121)

3-45

Cisco XR 12410 Router Installation Guide

OL-13832-01

Chapter 3 Installing the Cisco XR 12410 Router

Connecting Power to the Router

Connecting Power to an AC-Powered Router

Use the following procedure to connect the AC power cords to the router.

Note Connect each AC power supply to a dedicated power source (branch

circuit). Each AC-input power supply operates between 200 and 240

VA C

and requires at least a 20

A service for North American use, or a 13 A

service for international use. For more information on AC power cords,

see the “Power Connection Guidelines” section on page 2-13.

Step 1 Connect each power cable to the AC power connector on the horizontal trough and

secure them with their retention clips (

Figure 3-30).

Step 2 Plug each power supply cable into its AC outlet.

Figure 3-30 Connecting Source AC to the AC-Input Power Connector

52645

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 229 230

Keine Kommentare

Cisco Systems XR 12410 Installationshandbuch Seite 121