Cisco Systems 2.7 Bedienungsanleitung PDF herunterladen (Seite 94)

Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19

Setting Up IOS Access Points

5-16

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

78-16345-01

Step 9 The WDS access point must also register and authenticate itself to the WDS to

participate in the SWAN hierarchy; therefore, the WDS AP is also an

infrastructure AP. To configure the WDS access point as an infrastructure access

point:

wlccp ap username

username

password

Note To configure authentication for wireless clients, see the relevant AP

documentation.

Using a WLSE Configuration Template to Configure WDS Access Points

You can use the WLSE to configure one or more WDS access points.

The major configuration steps are:

• Create a configuration template to set up AAA servers and the WDS.

• Apply the configuration template to the appropriate access points by running

a configuration job.

To configure WDS access points by using a WLSE configuration template:

Step 1 Log in to the WLSE web interface.

Step 2 Select Configure > Templates.

a. Enter a template name, selecting IOS as the template type.

b. Click Create New.

Step 3 Enter the AAA servers for LEAP authenticating the infrastructure access points

and the WLSE to the WDS, and the AAA servers for authenticating wireless client

devices:

a. Select Security > Server Manager.

b. In the Corporate Servers section, for each server, enter the IP address, select

RADIUS, and enter the shared secret.

c. Click Save.

Step 4 Select Wireless Services > WDS to configure the WDS parameters.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 143 144

Keine Kommentare

Cisco Systems 2.7 Bedienungsanleitung Seite 94