Cisco Systems OL-25712-04 Bedienungsanleitung PDF herunterladen (Seite 356)

100

101

Step 6

In the MAC Security area, do the following to determine whether the server can use different MAC addresses

when sending packets to the fabric interconnect:

a) Click the Expand icon to expand the area and display the radio buttons.

b) Click one of the following radio buttons to determine whether forged MAC addresses are allowed or

denied when packets are sent from the server to the fabric interconnect:

• Allow— All server packets are accepted by the fabric interconnect, regardless of the MAC address

associated with the packets.

• Deny— After the first packet has been sent to the fabric interconnect, all other packets must use the

same MAC address or they will be silently rejected by the fabric interconnect. In effect, this option

enables port security for the associated vNIC.

If you plan to install VMware ESX on the associated server, you must configure the MAC Security to

allow for the network control policy applied to the default vNIC. If you do not configure MAC Security

for allow, the ESX installation may fail because the MAC security permits only one MAC address while

the installation process requires more than one MAC address.

Step 7

Click OK.

Deleting a Network Control Policy

Procedure

Step 1

In the Navigation pane, click the LAN tab.

Step 2

On the LAN tab, expand LAN > Policies > Organization_Name.

Step 3

Expand the Network Control Policies node.

Step 4

Right-click the policy you want to delete and select Delete.

Step 5

If the Cisco UCS Manager GUI displays a confirmation dialog box, click Yes.

Cisco UCS Manager GUI Configuration Guide, Release 2.0

320 OL-25712-04

Configuring Network Control Policies

1 2 ... 351 352 353 354 355 356 357 358 359 360 361 ... 767 768

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Systems OL-25712-04 Bedienungsanleitung Seite 356

Kommentare zu diesen Handbüchern