Cisco Systems OL-5532-02 Bedienungsanleitung PDF herunterladen (Seite 11)

4-11

Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2

OL-5532-02

Chapter 4 Remote Access VPN Services

Creating Remote Access VPN Policies

Figure 4-9 Address Pools Dialog Box

Step 3

Follow the instructions in Table 4-3 to enter values in the address pool fields.

Step 4 Click OK when done to return to the Remote Access VPN Policy – Address Pools page.

Step 5 The Address Pool Name field is enabled once an Address Pool is defined, as shown in Figure 4-10. If

you want to use with something other than the Cisco IOS or PIX Firewall autogenerated name for this

address pool, enter a name here for the address pools defined on this page.

Figure 4-10 The Remote Access VPN Policy – Address Pools Page

Table 4-3 Address Pools Fields

Field Name Type Instructions

Starting Address text box Enter the starting address of the IP address pool.

Ending Address text box Enter the ending address of the IP address pool. The address pool range must be

within a single subnet.

Net Mask text box Enter the netmask to enable autodetection of the remote access address pool during

creation of the service on the CPE devices, so that the remote access address pool can

be detected by peer devices. We recommend that you enter the netmask here in the

remote access policy, instead later of in the service request.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Keine Kommentare

Cisco Systems OL-5532-02 Bedienungsanleitung Seite 11