Cisco Systems WSC2960XR48FPSI Bedienungsanleitung Seite 124

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 178
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 123
Default VMPS Client Configuration
The following table shows the default VMPS and dynamic-access port configuration on client switches.
Table 13: Default VMPS Client and Dynamic-Access Port Configuration
Default SettingFeature
NoneVMPS domain server
60 minutesVMPS reconfirm interval
3VMPS server retry count
None configuredDynamic-access ports
How to Configure VMPS
Entering the IP Address of the VMPS
If the VMPS is being defined for a cluster of switches, enter the address on the command switch.Note
Before You Begin
You must first enter the IP address of the server to configure the switch as a client.
SUMMARY STEPS
1.
configure terminal
2.
vmps server ipaddress primary
3.
vmps server ipaddress
4.
end
5.
show vmps
6.
copy running-config startup-config
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
110 OL-29440-01
Configuring VMPS
Default VMPS Client Configuration
Seitenansicht 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 177 178

Kommentare zu diesen Handbüchern

Keine Kommentare