Cisco Systems MDS 9020 Bedienungsanleitung PDF herunterladen (Seite 15)

Send documentation comments to mdsfeedbac[email protected]

3-15

Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference

OL-6988-02

Chapter 3 Initial Configuration

Default Gateway Configuration

The switch sends IP packets with unresolved destination IP addresses to the default gateway. Figure 3-3

shows the default gateway.

Figure 3-3 Default Gateway

Configuring the Default Gateway

To configure the IP address of the default gateway, follow these steps:

CLI

GUI

DNS server

Network

Router

IP Address

172.16.1.1

Telnet or

SSH

SNMP

Management LAN

(Ethernet connection)

Switch 2

mgmt 0

(IP address:

172.16.1.2)

Console

connection

Default

gateway

79937

Command Purpose

Step 1

switch# config t

Enters configuration mode.

Step 2

switch(config)# ip default-gateway 172.16.1.1

Configures the 172.16.1.1 IP address.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Cisco Systems MDS 9020 Bedienungsanleitung Seite 15