Cisco Systems MDS 9020 Bedienungsanleitung PDF herunterladen (Seite 4)

Send documentation comments to mdsfeedbac[email protected]

3-4

Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference

OL-6988-02

Chapter 3 Initial Configuration

Initial Setup Routine

Setup Options

The setup scenario differs based on the subnet to which you are adding the new switch. You must

configure a Cisco MDS 9020 Fabric Switch with an IP address to enable management connections from

outside of the switch. Figure 3-1 shows a switch that is managed out-of-band over a connection to the

network through an Ethernet port.

Figure 3-1 Management Access to Switches

CLI

GUI

DNS server

network

Router

IP address

172.16.1.1

Telnet or

SSH

SNMP

Management LAN

(Ethernet connection)

Switch 2

mgmt 0

(IP address:

172.16.1.2)

Console

connection

Out of band

management

subnetwork

79936

1 2 3 4 5 6 7 8 9 ... 21 22

Keine Kommentare

Cisco Systems MDS 9020 Bedienungsanleitung Seite 4