Cisco Systems PA-4T Bedienungsanleitung PDF herunterladen (Seite 69)

Configuring the PA-4T+ Interfaces 8-15

Using show Commands to Display Interface Information

To display information about a speciﬁc interface, use the show interfaces command with the

interface type and port address in the format show interfaces [type slot/port] on a Cisco 7200 series,

Cisco uBR7200 series, or Cisco 7100 series router, or show interfaces [type slot/port-adapter/port]

on a VIP2.

Note Output from the show interfaces command displays the PA-4T+ as M4T.

Cisco 7200 Series, Cisco uBR7200 Series, and Cisco 7100 Series show interfaces Command

Following are examples of how the show interfaces [type slot/port] command on a Cisco 7200

series, Cisco 7100 series or a Cisco uBR7200 series router displays status information (including the

physical slot and port address) for the interface you specify. The four PA-4T+ interfaces (0–3) are in

port adapter slot 1.

Router# show interfaces serial 1/0

Serial1/0 is up, line protocol is up

Hardware is M4T

Internet address is 10.10.10.1

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255

Encapsulation PPP, loopback not set, keepalive set (10 sec)

(display text omitted]

Router# show interfaces serial 1/1

Serial1/1 is up, line protocol is up

Hardware is M4T

Internet address is 10.10.10.2

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255

Encapsulation PPP, loopback not set, keepalive set (10 sec)

(display text omitted]

Router# show interfaces serial 1/2

Serial1/2 is up, line protocol is up

Hardware is M4T

Internet address is 10.10.10.3

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255

Encapsulation PPP, loopback not set, keepalive set (10 sec)

(display text omitted]

Router# show interfaces serial 1/3

Serial1/3 is up, line protocol is up

Hardware is M4T

Internet address is 10.10.10.4

MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255

Encapsulation PPP, loopback not set, keepalive set (10 sec)

(display text omitted]

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 75 76

Keine Kommentare

Cisco Systems PA-4T Bedienungsanleitung Seite 69