Cisco Systems PGW 2200 Betriebsanweisung PDF herunterladen (Seite 324)

A-12

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide

OL-18083-01

Appendix A XECfgParm.dat File Parameters

Understanding the XECfgParm.dat File Format

*.logPrio (continued) • Critical—These messages indicate errors so severe that

a process cannot continue operating.

Note Do not change this value unless you are debugging.

*.LongCallTime Used to generate ongoing Call Data Block (CDB) 1060.

CDB 1060 (on-going call event) indicates a long call in

progress.

Default: 21600000 milliseconds (6 hours)

Minimum value required: 60000 milliseconds (60 seconds)

Note Typically, you should leave the value 21600000

milliseconds (6 hours) as the default. You can change

it, if necessary, based on billing requirements.

If you enter a value less than the required minimum

of 60000 milliseconds, it defaults to 6 hours.

*.M3UA.maxSigServices Defines the maximum number of Message Transfer Part

(MTP) Level 3 User Application (M3UA) signaling services.

It also defines the maximum number of M3UA routing keys.

Val ue : 1536