Cisco Systems 3000 Bedienerhandbuch Seite 155

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 234
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 154
CHAPTER
9-1
Cisco TelePresence System 3000
OL-14521-01
9
First-Time Setup
Revised: February 6, 2009, OL-14521-01
After you have assembled the Cisco TelePresence System (CTS), you set up the individual system
components (such as displays and cameras) using Hardware Setup, located under Troubleshooting in
the CTS Administration software. This chapter explains how to initially set up CTS components and
contains the following sections:
Loading CTS Administration Software, page 9-1
Setting Up CTS Components, page 9-4
Note You cannot perform diagnostics during an active Cisco TelePresence system call.
Parts List
Loading CTS Administration Software
CTS Administration Software is factory-installed on each codec and loads during initial bootup.
To load CTS Administration Software:
Step 1 Power on the three PDUs in that are located on the accessory cabinets and the single PDU that is
underneath the first row table (near the projector). If you use the Auxiliary Control Unit, power on that
unit as well.
Key Part Description Part Number Qty Ctn Notes
Camera Hood Assembly (Figure 9-7)
1
Camera assembly 68-2900-xx 1 2
2
Camera hood cover: top 1 2
3
Camera hood cover: bottom 1 2
7
M4 x 20mm Pan Head screws 48-0654-01 4 2
Seitenansicht 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 233 234

Kommentare zu diesen Handbüchern

Keine Kommentare