Cisco Systems MGX 8850 Betriebsanweisung PDF herunterladen (Seite 471)

100

101

6-53

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 6 Logical Node, Port, and Signaling Commands

cnfsscop

Configure SSCOP

The cnfsscop command lets you configure service-specific connection-oriented protocol (SSCOP) on a

port. You can use this command regardless of the state of the port. You must specify at least one of the

optional parameters.

Cards on Which This Command Runs

PXM45

Syntax

cnfsscop <portid>

[-polltmr {poll-timer | 0}]

[-keepalivetmr {keepalive-timer | 0}]

[-idletmr {idle-timer | 0}]

[-cctmr {cc-timer | 0}]

[-norsptmr {noresponse-timer | 0}]

[-t309tmr {t309-timer | 0}]

[-maxcc {retries | 0}]

[-sndwnd {send-window-packets | 0}]

[-rcvwnd {recv-window-packets | 0}]

Syntax Description

portid The portid is the PNNI physical port. The format is

[shelf.]slot[:subslot].port[:subport]. See also PNNI Format, page 6-4.

-polltmr Number of seconds to send POLL PDUs in the active phase. A 0 forces restore of the

default value.

Range: 1–5 seconds

Default: 1 second

-keepalivetmr Number of seconds to send POLL PDUs in the transient phase. 0 forces restore of the

default value.

Range: 1–10 seconds

Default: 5 seconds

-idletmr Number of seconds to send POLL PDUs in the idle phase. 0 forces restore of the

default value.

Range: 1–20 seconds

Default: 10 seconds

-cctmr Number of seconds to send BGN/END/RS/ER PDUs at the connection control phase.

0 forces restore of the default value.

Range: 1–5 seconds

Default: 1 second

1 2 ... 466 467 468 469 470 471 472 473 474 475 476 ... 785 786

Kommentare zu diesen Handbüchern

Keine Kommentare

Cisco Systems MGX 8850 Betriebsanweisung Seite 471

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Cisco Systems MGX 8850