Cisco Systems RF Gateway 10 Schnellstart Anleitung PDF herunterladen (Seite 16)

Figure 11 Installing the Cisco RFGW-10 in a Two-Post Equipment Rack

Caution If you are using a two-post rack, secure the rack to the floor surface to prevent tipping and avoid bodily injury and

component damage.

Step 1 On the chassis, ensure that all the screw fasteners on the installed components are securely tightened.

Step 2 Ensure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are engaged or that

the rack is otherwise stabilized. See the section on the types of racks you can use to install the chassis.

Step 3 (Optional) Install the chassis installation bracket into the rack to help support the chassis during installation. If you use

the bracket, this will help support the chassis while you secure it to the rack.

273881

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Keine Kommentare

Cisco Systems RF Gateway 10 Schnellstart Anleitung Seite 16