Cisco Systems WSC2960X48TDL Bedienungsanleitung PDF herunterladen (Seite 102)

power by shutting down certain services. EEE provides the protocol needed to transition into and out of LPI

mode in a way that is transparent to upper layer protocols and applications.

Default EEE Configuration

EEE is disabled by default.

Restrictions for EEE

EEE has the following restrictions:

•

Changing the EEE configuration resets the interface because the device has to restart Layer 1

autonegotiation.

•

You might want to enable the Link Layer Discovery Protocol (LLDP) for devices that require longer

wakeup times before they are able to accept data on their receive paths. Doing so enables the device to

negotiate for extended system wakeup times from the transmitting link partner.

How to Configure EEE

You can enable or disable EEE on an interface that is connected to an EEE-capable link partner.

Enabling or Disabling EEE

SUMMARY STEPS

configure terminal

interface interface-id

power efficient-ethernet auto

no power efficient-ethernet auto

end

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

90 OL-29034-01

Configuring EEE

Default EEE Configuration

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 108

Keine Kommentare

Cisco Systems WSC2960X48TDL Bedienungsanleitung Seite 102