Cisco Systems WSC2960X48TDL Bedienungsanleitung PDF herunterladen (Seite 57)

CHAPTER 4

Configuring Ethernet Management Port

This module contains the following sections:

•

Finding Feature Information, page 45

•

Prerequisites for Ethernet Management Ports, page 45

•

Information about the Ethernet Management Port, page 45

•

How to Configure the Ethernet Management Port, page 47

•

Additional References, page 48

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature

information and caveats, see the release notes for your platform and software release.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support.

To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not

required.

Prerequisites for Ethernet Management Ports

When connecting a PC to the Ethernet management port, you must first assign an IP address.

Information about the Ethernet Management Port

The Ethernet management port, also referred to as the Fa0 or fastethernet0 port, is a Layer 3 host port to

which you can connect a PC. You can use the Ethernet management port instead of the switch console port

for network management. When managing a switch stack, connect the PC to the Ethernet management port

on a stack member.

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 45

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 107 108

Keine Kommentare

Cisco Systems WSC2960X48TDL Bedienungsanleitung Seite 57