Cisco Systems WSC2960X48TDL Bedienungsanleitung PDF herunterladen (Seite 58)

Ethernet Management Port Direct Connection to a Switch

This figure displays how to connect the Ethernet management port to the PC for a switch or a standalone

switch.

Figure 2: Connecting a Switch to a PC

Ethernet Management Port Connection to Stack Switches using a Hub

In a stack with only stack switches, all the Ethernet management ports on the stack members are connected

to a hub to which the PC is connected. The active link is from the Ethernet management port on the stack

masterthrough the hub, to the PC. If the active switch fails and a new active switch is elected, the active link

is now from the Ethernet management port on the new active switch to the PC.

This figure displays how a PC uses a hub to connect to a switch stack.

Figure 3: Connecting a Switch Stack to a PC

Supported Features on the Ethernet Management Port

The Ethernet management port supports these features:

•

Express Setup (only in switch stacks)

•

Network Assistant

•

Telnet with passwords

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

46 OL-29034-01

Configuring Ethernet Management Port

Ethernet Management Port Direct Connection to a Switch

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 107 108

Keine Kommentare

Cisco Systems WSC2960X48TDL Bedienungsanleitung Seite 58