Cisco Systems WSC2960X48TDL Bedienungsanleitung PDF herunterladen (Seite 73)

PurposeCommand or Action

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Switch# copy running-config

Step 5

startup-config

Configuring Network-Policy TLV

Beginning in privileged EXEC mode, follow these steps to create a network-policy profile, configure the

policy attributes, and apply it to an interface.

SUMMARY STEPS

configure terminal

network-policy profile profile number

{voice | voice-signaling} vlan [vlan-id {cos cvalue | dscp dvalue}] | [[dot1p {cos cvalue | dscp dvalue}]

| none | untagged]

exit

interface interface-id

network-policy profile number

lldp med-tlv-select network-policy

end

show network-policy profile

10.

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Specifies the network-policy profile number, and enter network-policy

configuration mode. The range is 1 to 4294967295.

network-policy profile profile number

Example:

Switch(config)# network-policy profile

Step 2

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 61

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring Network-Policy TLV

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 107 108

Keine Kommentare

Cisco Systems WSC2960X48TDL Bedienungsanleitung Seite 73